Announcement

Collapse
No announcement yet.

will they work Mount-It! MI-SB03

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • will they work Mount-It! MI-SB03

    will these work with the nakaxhimi 9.2 4 rears and surround Mount-It! MI-SB03 wall mounts

    and can you set them up on the wall mounts as hybrid elevation as well thanks

  • #2
    I believe they should work to wall mount your rear speakers as per Naka's recommendation list but its subjective as to what is the best positioning since it depends on your room layout and acoustics preferences..

    Comment


    • #3
      I’m looking for speaker stand that can work in a Dipole 1 Configuration. Any recommendations other than the Help Desk ones. The stand recommend on the help desk seems too present issues as the surround speakers attach in the back and don’t have mounting hardware underneath. Help Desk recommends:
      "FOR DIPOLE
      SANUS SF34-B1 Steel Foundation IV 34" Speaker Stands


      Sanus.com reads

      "5) Many manfucturers are providing threaded inserts on the bottom of their speakers for the Foundation MountTM system. This

      system allows you to bolt your speaker to the top plate using 5/8" speaker bolts provided."

      So how would I attach the speakers to the stand? Or would I attach the speakers to each other as in "Dipole 1 Quad Modular Speakers Attached" in on the Nakamichi website and just let them rest on the Sanus stand? Letting them rest on the stands without attaching them securely is not an option in California where earthquakes occur.


      Also is there a Stand where I could mount two speakers on one stand in a Hybrid Elevation 1 configuration depicted on the Nakamichi website?

      In my version of a Hybrid Elevation 1 where one speaker is on top of the other on a single stand I would place the sub woofers at the base of the stands.

      I’m considering the Shockwafe Ultra but really would like to see how I could minimize the number of stands around my living room. Any suggestions on stands?







      Comment


      • #4
        Hello Geeno1

        I have checked in with Nak's specialists on this and they have suggested the Atlantic Satellite 77305018 Adjustable Speaker Stand​. Apparently there is sufficient hardware from the speaker stand kit and the Shockwafe's mounting kit provided to allow for you to set up Dipole 1 configuration.


        Comment

        Working...
        X